Temperature measurement point The temperature measurement point should be selected where the thermometer Wholesale planetary gear units can touch the lubricating oil of the cycloid reducer. The placement of the thermometer should be free from exteal radiant heat and airflow.
When the measured reducer meets the requirements, read the deceleration The operating temperature of the machine at rated speed and rated input power. The indoor ambient temperature should be in the range of 5-40℃. Measurement method 1. t2—— t1—— Δt=t1--t2. Calculation of temperature rise The temperature rise is calculated as follows: where: Δt——temperature rise of the reducer, ℃working temperature of the cycloid reducer at rated
speed and rated input power, ℃ ambient temperature, ℃.5m from the surface of the measured cycloid reducer. The measurement of the temperature rise of the measured reducer is usually carried out at the same time as the measurement of the load capacity and transmission efficiency of the reducer, or it can be carried out separately. Environmental conditions 1 The temperature rise of the cycloid reducer should be measured indoors that are not affected by exteal temperature.
Place a thermometer at a distance of 1. The way.1.5℃. Should indoor air circulate freely? Forced circulation is not allowed. The reading of the ambient temperature value and the reading of the working temperature value should be carried out simultaneously. Thermometer division value is 0. The height of the measuring point of the thermometer from the ground is equal to the height of the axis of the reducer. Measurement of working temperature. 2. 2. Measurement of ambient temperature
نویسنده : parallelgearboxs
برچسبها : Wholesale planetary gear units,